- European certification
- US certification
- Asian certification
- Australian certification
- Chemical detection
- Medical certification
- Energy efficiency certification
- Industrial product certification
- Reliability test
- Vehicle test certification
- Military product certification
- Other certification services
- Robot CR certification
-
- 消防認證
National testing and certification one-stop service hotline:15013801663
|
Home > Services
China CTA access network
- Time：2018-04-24
- Viewing count：1573
CTA network certification introduction
The "Network Access License" for communication products is commonly known as "CTA" in the industry. According to the current laws and regulations of China, the state implements a network access permit system for telecommunications terminal equipment, radio communication equipment and telecommunications equipment involved in accessing the public telecommunication network (mobile, China Unicom, and telecommunications). The telecommunications equipment that implements the network access licensing system must obtain the network access license issued by the Ministry of Information Industry; if it does not obtain the network access license, it shall not access the public telecommunications network and use it for domestic sales.
1. Application method: First, the applicant enterprise needs to sample the product and send it to the only designated laboratory in the country (Tyler Laboratories) for testing. After passing the test, the test report is obtained, and then the test report of the electronic product is The Model Approval Certificate (SRRC) is submitted to the administrative department of the Ministry of Industry and Information Technology for application. After the application is approved, the competent department of the Ministry of Industry and Information Technology will issue the “Network Access License” certificate and label to the applicant;
2.
Required information: 1. The product must be in the CCC range and must have a 3C certificate.
2, EMC test report
3. National Tel Lab test report
4, MTnet test report
5, SRRC certificate
3.
Fee:
1. Tell Labs: Products sent to Tell Labs should pay the laboratory the testing fee of the national standard during the test.
Testing fee reference standard
2G standard: about 70,000 yuan;
3G standard: about 91,000 yuan;
4G system: about 140,000;
2. The competent department of the Ministry of Industry and Information Technology: After obtaining the "Test Report", the Ministry of Industry and Information Technology applies for the "Network Access License" and passes the certificate and the network label is not charged.
3. If the applicant entrusts a third-party agency service agency to apply for the agency service fee (market behavior, fee negotiable)
The "Network Access License" for communication products is commonly known as "CTA" in the industry. According to the current laws and regulations of China, the state implements a network access permit system for telecommunications terminal equipment, radio communication equipment and telecommunications equipment involved in accessing the public telecommunication network (mobile, China Unicom, and telecommunications). The telecommunications equipment that implements the network access licensing system must obtain the network access license issued by the Ministry of Information Industry; if it does not obtain the network access license, it shall not access the public telecommunications network and use it for domestic sales.
1. Application method: First, the applicant enterprise needs to sample the product and send it to the only designated laboratory in the country (Tyler Laboratories) for testing. After passing the test, the test report is obtained, and then the test report of the electronic product is The Model Approval Certificate (SRRC) is submitted to the administrative department of the Ministry of Industry and Information Technology for application. After the application is approved, the competent department of the Ministry of Industry and Information Technology will issue the “Network Access License” certificate and label to the applicant;
2.
Required information: 1. The product must be in the CCC range and must have a 3C certificate.
2, EMC test report
3. National Tel Lab test report
4, MTnet test report
5, SRRC certificate
3.
Fee:
1. Tell Labs: Products sent to Tell Labs should pay the laboratory the testing fee of the national standard during the test.
Testing fee reference standard
2G standard: about 70,000 yuan;
3G standard: about 91,000 yuan;
4G system: about 140,000;
2. The competent department of the Ministry of Industry and Information Technology: After obtaining the "Test Report", the Ministry of Industry and Information Technology applies for the "Network Access License" and passes the certificate and the network label is not charged.
3. If the applicant entrusts a third-party agency service agency to apply for the agency service fee (market behavior, fee negotiable)
Previous：China CCC Certification
Copyright ? Shenzhen Bojunda Electronic Technology Co., Ltd.
Contact: Miss Huang Tel: 15013801663
Address: 3rd Floor, Building 1, No. 14, Factory Building, No.1 Industrial Pit, No.1 Industrial Zone, Langxin Community, Shiyan Street, Baoan District, Shenzhen
-
Online consultation
-
Telephone consultation
15013801663 -
Back to top