The benefits and necessity of CE certification
- Time：2018-03-27
- Viewing count：1434
Introduction to CE certification
CE certification is the “major requirement” that forms the core of the European Directive. It is required to be developed and implemented in the European Community’s Resolution (85/C136/01) of May 7, 1985, on the New Approach to Technical Coordination and Standards. The “main requirements” of the purpose of the directive have a specific meaning, that is, the product only does not endanger the basic safety requirements of the safety aspects of humans, animals and goods, rather than the general quality requirements. The coordination directive only specifies the main requirements, and the general directive requirements are standard tasks. . If the product meets the relevant requirements of the relevant directives, the CE mark can be attached, and the CE mark cannot be determined according to the general quality requirements of the relevant standards. Therefore, the exact meaning is that the CE mark is a safety pass mark and not a quality pass mark. It is regarded as a passport that manufacturers open and enter the European market. Any product with the “CE” mark can be sold in EU member states without meeting the requirements of each member country, thus realizing the scope of goods in EU member states. Free circulation within.
The word CE is abbreviated from the French word "Communate Europpene" and means the European Community. The European Community later evolved into the European union (EU).
The meaning of the CE mark
The meaning of the CE mark is that the CE acronym is used to indicate that the product bearing the CE mark meets the requirements of the European Directive and is used to verify that the product has passed the appropriate conformity assessment procedures and/or manufacturing. The merchant's declaration of conformity truly becomes a passport for products to be allowed to enter the European Community market.
For industrial products that require the CE mark to be affixed to the Directive, if there is no CE mark, it shall not be listed for sale. Products that have been affixed with the CE mark to enter the market. If they fail to meet the safety requirements, they shall be ordered to recover from the market and continue to violate the CE marking requirements of the Directive. Will be restricted or prohibited from entering the EU market or forced to withdraw from the market.
The CE mark is not a quality mark. It is a mark that indicates that the product has met the European safety/health/environment/sanitation series of standards and directives. All products sold in the EU are mandatory to bear the CE mark.
The need to apply for CE certification
CE certification provides a unified technical specification for trade of products in the European market and simplifies trade procedures. To enter the EU and the European Free Trade Zone, products of any country must be CE-certified and CE marked on the product. Therefore, CE certification is a passport for products entering the EU and European Free Trade Zone countries.
CE certification indicates that the product has met the safety requirements stipulated by the EU Directive; it is a commitment of the company to consumers, increasing the level of consumer trust in the product; products marked with CE mark will reduce the risk of sales in the European market. These risks include:
The risk of being detained and investigated by the customs;
風險 the risk of being investigated by the market surveillance agency;
風險 The risk of being accused by competitors for competitive purposes.
Benefits of applying for CE certification
1The EU's laws, regulations and harmonized standards are not only numerous, but also very complex. Therefore, it is a wise move to save time and effort while reducing the risk.
2 Obtain the CE certification from the designated institution of the European union to maximize the trust of consumers and market surveillance agencies;
3 can effectively prevent the occurrence of irresponsible allegations;
4 In the case of litigation, the CE certification of the designated body of the European union will become technical evidence with legal effect;
CE certification scope of application
The EU EU and the EEA countries of the European Economic Area require the CE mark. By January 2013, the EU EU had 27 member states. They were:
Austria Austria, Belgium Belgium, Denmark Denmark, Finland Finland, France France, Germany Germany, Greece Greece, Ireland Ireland, Italy Italy, Luxemburg Luxembourg, Netherlands Netherlands, Portugal Portugal, Spain Spain, Sweden Sweden, United Kingdom (Great Britain) United Kingdom, Estonia Estonia, Latvia Latvia, Lithuania Lithuania, Poland Poland, Czech Republic Czech Republic, Slovakia Slovakia, Hungary Hungary, Slovenia Slovenia, Malta Malta, Cyprus Cyprus, Romania Romania, Bulgaria Bulgaria.
European Free Trade Association EFTA's three member states: Iceland, Liechtenstein, Liechtenstein, Norway, Norway.
Semi-EU countries: Turkey Turkey.
Technical documents to be prepared for CE certification
1. The name and address of the manufacturer (authorized representative of the EU (EU authorized agent) AR), the name and model of the product, etc.;
2. Product instruction manual;
3. Safety design documents (including key structural drawings, which are design drawings that reflect the distance, gap, number of insulation layers and thickness);
4. Product technical conditions (or enterprise standards), establish technical information;
5. Schematic diagram, block diagram and circuit diagram of product electrical appliances;
6. List of key components or raw materials (please select products with European certification mark);
7. Test Report (Testing Report);
8. The relevant certificate issued by the EU authorized certification body NB (for modes other than mode A);
9. The certificate of registration of the product in the EU (for certain products such as: Class I medical equipment, ordinary IVD in vitro diagnostic medical equipment);
10. CE Declaration of Conformity (DOC);
CE certified product type
1. Power CE certification: communication power supply, switching power supply, charger, display power supply, LED power supply, LCD power supply, uninterruptible power supply UPS, etc.;
2, CE certification of lamps: chandeliers, track lights, garden lights, portable lights, downlights, LED street lights, light strings, table lamps, LED spotlights, LED bulbs, grille lights, aquarium lights, street lights, LED tubes, LED lamps, energy-saving lamps, T8 lamps, etc.;
3, home appliance CE certification: fan, electric kettle, audio, TV, mouse, vacuum cleaner, etc.;
4, electronic CE certification: earplugs, routers, mobile phone batteries, laser pointers, vibrators, etc.;
5, CE certification of communication products: telephone, wired telephone wireless main and auxiliary machine, fax machine, answering machine, data machine, data interface card and other communication products.
6, wireless product CE certification: Bluetooth BT products, tablet computers, wireless keyboards, wireless mice, wireless readers, wireless transceivers, wireless walkie-talkies, wireless microphones, remote controls, wireless network devices, wireless video transmission systems and other low Power wireless products, etc.;
7. CE certification for wireless communication products: 2G mobile phone, 3G mobile phone, 3.5G mobile phone, DECT mobile phone (1.8G, 1.9G frequency band), wireless walkie-talkie, etc.
8, mechanical CE certification: gasoline engine, electric welding machine, CNC drilling machine, tool grinding machine, lawn mower, washing equipment, bulldozer, lift, drilling machine, dishwasher, water treatment equipment, gasoline welding machine, printing machinery, woodworking machinery , rotary drilling rigs, lawn mowers, snow sweepers, excavators, printing presses, printers, cutting machines, road rollers, trowels, brush cutters, hair straighteners, food machinery, lawn mowers, etc.;
9. CE certification for medical devices;
CE certification considerations
When CE certification is required, pay attention to the authoritative CE certification body. The CE certification passed after passing the product test is the real CE certification. Shenzhen Huantong Testing Technology Co., Ltd. is different from CE agency and CE consulting company/CE consulting. The organization has a professional independent laboratory and rich experience in CE certification. It can provide comprehensive and one-stop testing and certification services. It has reached mutual recognition agreements with 58 countries and regions such as the United States, the United Kingdom, and Germany. International credibility, is a CE certification company of CE certification authority, is the third-party laboratory of German TUV Rheinland standardization, can be the German TUV Rheinland CE certification agent.
The EU CE certification is the preferred HTT Bo Junda, welcome to CE product consultation and CE product certification!
CE certification is the “major requirement” that forms the core of the European Directive. It is required to be developed and implemented in the European Community’s Resolution (85/C136/01) of May 7, 1985, on the New Approach to Technical Coordination and Standards. The “main requirements” of the purpose of the directive have a specific meaning, that is, the product only does not endanger the basic safety requirements of the safety aspects of humans, animals and goods, rather than the general quality requirements. The coordination directive only specifies the main requirements, and the general directive requirements are standard tasks. . If the product meets the relevant requirements of the relevant directives, the CE mark can be attached, and the CE mark cannot be determined according to the general quality requirements of the relevant standards. Therefore, the exact meaning is that the CE mark is a safety pass mark and not a quality pass mark. It is regarded as a passport that manufacturers open and enter the European market. Any product with the “CE” mark can be sold in EU member states without meeting the requirements of each member country, thus realizing the scope of goods in EU member states. Free circulation within.
The word CE is abbreviated from the French word "Communate Europpene" and means the European Community. The European Community later evolved into the European union (EU).
The meaning of the CE mark
The meaning of the CE mark is that the CE acronym is used to indicate that the product bearing the CE mark meets the requirements of the European Directive and is used to verify that the product has passed the appropriate conformity assessment procedures and/or manufacturing. The merchant's declaration of conformity truly becomes a passport for products to be allowed to enter the European Community market.
For industrial products that require the CE mark to be affixed to the Directive, if there is no CE mark, it shall not be listed for sale. Products that have been affixed with the CE mark to enter the market. If they fail to meet the safety requirements, they shall be ordered to recover from the market and continue to violate the CE marking requirements of the Directive. Will be restricted or prohibited from entering the EU market or forced to withdraw from the market.
The CE mark is not a quality mark. It is a mark that indicates that the product has met the European safety/health/environment/sanitation series of standards and directives. All products sold in the EU are mandatory to bear the CE mark.
The need to apply for CE certification
CE certification provides a unified technical specification for trade of products in the European market and simplifies trade procedures. To enter the EU and the European Free Trade Zone, products of any country must be CE-certified and CE marked on the product. Therefore, CE certification is a passport for products entering the EU and European Free Trade Zone countries.
CE certification indicates that the product has met the safety requirements stipulated by the EU Directive; it is a commitment of the company to consumers, increasing the level of consumer trust in the product; products marked with CE mark will reduce the risk of sales in the European market. These risks include:
The risk of being detained and investigated by the customs;
風險 the risk of being investigated by the market surveillance agency;
風險 The risk of being accused by competitors for competitive purposes.
Benefits of applying for CE certification
1The EU's laws, regulations and harmonized standards are not only numerous, but also very complex. Therefore, it is a wise move to save time and effort while reducing the risk.
2 Obtain the CE certification from the designated institution of the European union to maximize the trust of consumers and market surveillance agencies;
3 can effectively prevent the occurrence of irresponsible allegations;
4 In the case of litigation, the CE certification of the designated body of the European union will become technical evidence with legal effect;
CE certification scope of application
The EU EU and the EEA countries of the European Economic Area require the CE mark. By January 2013, the EU EU had 27 member states. They were:
Austria Austria, Belgium Belgium, Denmark Denmark, Finland Finland, France France, Germany Germany, Greece Greece, Ireland Ireland, Italy Italy, Luxemburg Luxembourg, Netherlands Netherlands, Portugal Portugal, Spain Spain, Sweden Sweden, United Kingdom (Great Britain) United Kingdom, Estonia Estonia, Latvia Latvia, Lithuania Lithuania, Poland Poland, Czech Republic Czech Republic, Slovakia Slovakia, Hungary Hungary, Slovenia Slovenia, Malta Malta, Cyprus Cyprus, Romania Romania, Bulgaria Bulgaria.
European Free Trade Association EFTA's three member states: Iceland, Liechtenstein, Liechtenstein, Norway, Norway.
Semi-EU countries: Turkey Turkey.
Technical documents to be prepared for CE certification
1. The name and address of the manufacturer (authorized representative of the EU (EU authorized agent) AR), the name and model of the product, etc.;
2. Product instruction manual;
3. Safety design documents (including key structural drawings, which are design drawings that reflect the distance, gap, number of insulation layers and thickness);
4. Product technical conditions (or enterprise standards), establish technical information;
5. Schematic diagram, block diagram and circuit diagram of product electrical appliances;
6. List of key components or raw materials (please select products with European certification mark);
7. Test Report (Testing Report);
8. The relevant certificate issued by the EU authorized certification body NB (for modes other than mode A);
9. The certificate of registration of the product in the EU (for certain products such as: Class I medical equipment, ordinary IVD in vitro diagnostic medical equipment);
10. CE Declaration of Conformity (DOC);
CE certified product type
1. Power CE certification: communication power supply, switching power supply, charger, display power supply, LED power supply, LCD power supply, uninterruptible power supply UPS, etc.;
2, CE certification of lamps: chandeliers, track lights, garden lights, portable lights, downlights, LED street lights, light strings, table lamps, LED spotlights, LED bulbs, grille lights, aquarium lights, street lights, LED tubes, LED lamps, energy-saving lamps, T8 lamps, etc.;
3, home appliance CE certification: fan, electric kettle, audio, TV, mouse, vacuum cleaner, etc.;
4, electronic CE certification: earplugs, routers, mobile phone batteries, laser pointers, vibrators, etc.;
5, CE certification of communication products: telephone, wired telephone wireless main and auxiliary machine, fax machine, answering machine, data machine, data interface card and other communication products.
6, wireless product CE certification: Bluetooth BT products, tablet computers, wireless keyboards, wireless mice, wireless readers, wireless transceivers, wireless walkie-talkies, wireless microphones, remote controls, wireless network devices, wireless video transmission systems and other low Power wireless products, etc.;
7. CE certification for wireless communication products: 2G mobile phone, 3G mobile phone, 3.5G mobile phone, DECT mobile phone (1.8G, 1.9G frequency band), wireless walkie-talkie, etc.
8, mechanical CE certification: gasoline engine, electric welding machine, CNC drilling machine, tool grinding machine, lawn mower, washing equipment, bulldozer, lift, drilling machine, dishwasher, water treatment equipment, gasoline welding machine, printing machinery, woodworking machinery , rotary drilling rigs, lawn mowers, snow sweepers, excavators, printing presses, printers, cutting machines, road rollers, trowels, brush cutters, hair straighteners, food machinery, lawn mowers, etc.;
9. CE certification for medical devices;
CE certification considerations
When CE certification is required, pay attention to the authoritative CE certification body. The CE certification passed after passing the product test is the real CE certification. Shenzhen Huantong Testing Technology Co., Ltd. is different from CE agency and CE consulting company/CE consulting. The organization has a professional independent laboratory and rich experience in CE certification. It can provide comprehensive and one-stop testing and certification services. It has reached mutual recognition agreements with 58 countries and regions such as the United States, the United Kingdom, and Germany. International credibility, is a CE certification company of CE certification authority, is the third-party laboratory of German TUV Rheinland standardization, can be the German TUV Rheinland CE certification agent.
The EU CE certification is the preferred HTT Bo Junda, welcome to CE product consultation and CE product certification!
